Dingo Mini Digger – K9DW

Dingo Mini Digger – K9DW
(K9-DW Diesel Wheeled)
Dingo Mini Digger – K9DW
Designed and manufactured exclusively by Dingo Australia, the K9DW 27HP Diesel Mini Digger sits midrange of our 3 wheeled mini diggers. It is the next step up from the 21HP Petrol Wheeled K9PW and a step below the Contractor Class 27HP Diesel K9CW Mini Digger.
The lean fuel burn of the 27HP Yanmar Diesel Engine, delivers excellent fuel economy, reducing running costs. The high flow Auxiliary Hydraulics will power your certified Dingo attachments through the toughest conditions.
Combining the unique hydraulic design with the Yanmar Diesel engine, provides the perfect partnership of power, pressure and durability for every application. The K9DW has the most robust chassis on the market – this moves the weight down to the wheelbase where it is needed. The lower center of gravity gives you best in class traction and trenching up to 30% more pull and 30% more push power.
Achieve more with the best and highest lift for the weight class. Our proven bushing system has no steel-on-steel wear – which means no grease, no mess resulting in less maintenance and longer machine life! Protected by our touch powder-coated finish, our K9DW model will stand up against the harshest of conditions.
The K9DW Mini Digger will deliver unmatched performance consistently, day in day out, year after year!
Optional Narrow Wheel And Hubs
The Dingo all-wheel drive K9DW model is perfect for all terrains. The optional narrow wheel and hub set, enables a quick change of the set-up to access narrow spaces whenever required. Set it as narrow as 780 mm which can eliminate the need for a second machine.
Achieve more with the best and highest lift for the weight class. Our proven bushing system has no steel-on-steel wear – which means no grease, no mess resulting in less maintenance and longer machine life! Your K9DW mini digger is protected by our touch powder-coated finish.
Warranty 5 years/5000 hours
Specifications
Performance | |
---|---|
Engine | 3TNV76 |
Engine make | Yanmar |
Engine horsepower | 27 hp |
Hydraulic horsepower | 26.8 hp |
Hydraulic pumps | 2 pumps |
Pump sizes | 11 & 4cc |
Relief pressure (AUX) | 3200 psi (220 bar) |
Hydraulic output | 47 L/m |
Max travel speed | 7.5 km/h |
Rated lift capacity | 325 kg WLL |
Dimensions | ||
---|---|---|
A | Overall width | 850 - 1,050 mm |
B | Overall length | 1,600 mm |
C | Overall height | 1,200 mm |
D | Max operating height with 4 in 1 bucket | 2,080 mm |
E | Turning radius with 4 in 1 bucket | 1,300 mm |
F | Angle of departure | 25° |
G | Wheel base | 800 mm |
H | Ground clearance | 135 mm |
I | Dump height standard bucket | 1,450 mm |
J | Dump height with 4 in1 bucket | 1,835 mm |
K | Reach fully raised 4 in 1 bucket | 800 mm |
L | Height to hinge pin | 1,940 mm |
M | Machine width with 4 in1 bucket | 1,050 mm |
Hydraulic reservoir capacity | 76 L | |
Machine mass | 984 - 1,093 kg |

Standard features
All wheel drive system
High flow auxiliary hydraulic
Grease free maintenance
180° access
Soft touch controls
1,840mm lift
Rupture resistant fuel tank