Post Hole Digger

The post hole digger is one of the most powerful attachments for the Dingo, easily able to out-dig many larger machines.

The Dingo Post Hole Digger is fitted with and 8:1 reduction gear box that gives enough torque to dig holes up to a 750mm diameter and up to a depth of 3 metres. You can dig to 1.5 metres with a standard auger, up to 2 metres with an auger extension and 3 metres with the Pinocchio nose extension.

With the correct digging teeth fitted, the Dingo can be used to dig through concrete, sandstone, reinforced road base and bitumen.

Auger Mate - This handy tool is part of the multi tool kit and allows you to lift heavy augers off your trailer, saving your back.

Post Mate - This handy tool is unique to Dingo and allows you to increase your down-force on the auger in tough digging. The post mate is also useful for lifting the wheels off the ground when changing your tyres. Don't buy a post hole digger without the post mate.

Pinocchio Attachment - This extension unique to Dingo allows you to dig up to a depth of 3m without needing to add and remove auger extensions.


Used for

Digging post holes in soil, clay, sand and rock/shale.

Used by

Landscapers, contractors and hire companies.

Used with

Cement mixer, Post Hole Mate, Auger Mate, and auger extensions.

Play Video


Digging DepthAugers over 300mm and over: 1.5m standard or 3m with the Pinocchio nose extension
Augers under 300mm: 1.1m+ extensions
Cut Diameter100 – 750mm
Teeth TypesEarth, Tungsten, Rock
Flow32 l/min
Pressureup to 206Bar (3000PSI)
Approx WeightPHD Drive Head = 64kg
Augers: 12-58kg